Sensor Hoblo 70SP
Energy savings with motion detection.
Motion sensors with adjustable radius of action and length of intervention. When a movement is detected, they enable a light source to be activated at 10% to 100% intensity, for a time that can be programmed. The sensor can be activated/deactivated remotely thanks to the "Touch-SENP" transmitter supplied as standard.
Settings
Detection area
Set the area read by the sensor from 30 cm to 6 m
Daytime light sensor
Set the minimum light threshold in the room to determine when the sensor is activated.
Timer
Set how long the lamp stays on after the person has left the detection area.
Brightness level
Set the brightness level (0-100%) at which the light is activated after movement has been sensed in the detection area for the duration of the hold time
Stand-by time
Set the period after the hold time when a lower light intensity is maintained (stand-by dimming level). This can be set from 0 (not in operation) to infinity (manual switch off only).
Dimmer function stand-by level
Set the brightness level (0-100%) of the light during the stand-by time (after the hold time).
Presence sensor with radio transmission, rolling code 433.92MHz, 110/240vAC. It includes a TOUCH-SENP transmitter to switch the sensor on/off and to manage the lights manually.
Power supply 110-240Vac
Radio code Bidirectional - Rolling code
Radio frequency 433.92 MHz ISM
Range 100 m in free field (40 m inside)
Dimensions
Diameter 70 mm, h 55 mm (table vers.), h 30 mm (wall-mounted vers.)
Operating area 6 m and 120°
